Home > Inserts for Manufacturers > E-Z LOK Threaded Inserts, Tools and Kits > E-Z LOK Threaded Inserts >

319-M8 | E-Z LOK™ Threaded Insert for Metal - Thin Wall - Carbon Steel - M8-1.25 x 7/16-14 [5 PER BOX]
E-Z LOKâ„¢ 319-M8
E-Z LOK™ 319-M8
  
Price per Box: $11.35 / Quantity Discounts Available
Price per Piece: $2.27

Request a quote for a custom quantity or add to cart
(Minimum order):  5


Availability: Stock item. Usually ships in 1 to 2 days
Product Code: EZL319-M8
Qty:

Description
 
319-M8 | E-Z LOK™ Threaded Insert for Metal - Thin Wall - Carbon Steel - M8-1.25 x 7/16-14

E-Z LOK™ (Solid Wall) Thin Wall inserts offer the advantages of E-Z LOK™ (Solid Wall) Standard Wall threaded inserts while using a hole size virtually the same as E-Z Coil™ inserts.

Ideal for applications where thread insert size and weight are an issue, Thin Wall threaded inserts pack all the traditional E-Z LOK™ (Solid Wall) advantages into a smaller diameter design. Available with internal thread sizes from #10 to 1/2 and M4 to M12, E-Z LOK™ (Solid Wall) Thin Wall threaded inserts install with standard tools.

E-Z LOK™ (Solid Wall) Thin Wall solid threaded inserts use a modified external thread to reduce the hole diameter needed to achieve the desired internal thread size. To achieve this size reduction, these inserts have an oversized minor diameter on the OD thread. This provides sufficient wall thickness to maintain insert integrity, but does necessitate the use of a drill that is larger than typically used with the corresponding tap.

For example, a Standard Wall insert with a 5/8-11 external thread (7/16-14 ID) requires the use of a 17/32 drill. A Thin Wall insert with a 5/8-11 external thread (1/2-13 ID) requires the use of a 37/64 drill.

E-Z LOK™ (Solid Wall) Thin Wall inserts are self-locking. Immediately upon installation, pre-applied LOCTITE™ on the external threads begins to set and the newly installed insert is fastener ready in minutes. At full cure (72 hours), the Loctite™ seals against liquids and gases to pressures of 6,000 psi.
Product Details


  • MS/NAS P/N:EZL319-M8
  • Type:Inserts
  • Subtype 1:Solid Wall
  • Subtype 2:Thin Wall
  • Inch or Metric:Metric
  • Size-Diameter x Thread:M8 X 1.25
  • Installed Length:11MM
  • Drill Size:X
  • Tap Size:7/16-14
  • Minimum Full Thread Depth:0.5
  • Weight per Box:0.0335
  • Weight per Piece:0.0067
  • Material:Carbon Steel
  • For Use In:Metal
  • Installation Tool P/N:500-4
  • P/N:319-M8

Accessories
500-4 | Drive Tool for E-Z LOK™ Threaded Inserts (Internal Threads: 5/16-18, 5/16-24, M8-1.25) [1 PER BOX]
Price per Box: $10.77 / Quantity Discounts Available
E-Z LOKâ„¢ 500-4