|
|
|
|
|
|
|
Product Details
- Universal Hand tool used to install key-locking inserts after drilling and tapping hole. See tables for correct dimensions.
- To use tool:
- Drill with a standard tap drill and countersink with a standard 82°-100° countersink tool
- Tap new threads with a standard tap
- Screw in the insert until it is 0.25-0.70 mm (0.010-0.030 inch) below the surface. Insert keys locate the key-locking insert at the correct depth.
- Drive keys down with several hammer taps on the specified installation tool.
|
|
|
|
|
|
|